Young Industries, Inc.

16 Painter Street
Muncy, PA USA
17756-0030
Ph: 570-546-3165
800-546-3165
mktinfo@younginds.com

 

 

 

 

 

 

TransVair Pnematic Conveyors

TransVair Dilute Phase Pneumatic Conveyor

 

Request for more Information or quotation

 

 

 

 

 

 

 

 

 

Young Industries' Provides Rugged and Reliable TransVair Dilute Phase Pneumatic Conveyors

 

. Since 1947, Young Industries products are known for their long history of innovation and proven reliability. Young has been providing equipment with the lowest overall cost of ownership as compared with equipment having low initial cost.

 

Young Industries offers a wide range of pneumatic conveyors . These pneumatic systems range in capacity from 1000 to 200,000 pounds per/hour utilizing a multitude of configurations to meet the specific design requirements.

 

Young Industries, Inc. is a value-engineered based manufacturer of bulk materials handling equipment and systems. Our goal is to supply bulk materials handling products, services and replacement parts that are safe, trouble-free to install, simple to maintain, and easy to operate.

 

As a result, the Young Industries, pneumatic conveyor have been proven to provide superior performance and reliability in a wide range of bulk materials handling applications, and offer a low cost of owner ship.

 

The dilute phase pneumatic conveyors offered are as follows:

Positive Pressure Systems

Negative Pressure Systems

Combination Negative/Positive Pressure Systems

Closed Loop Systems

Centrifugal Blower

 

 

POSITIVE PRESSURE - DILUTE PHASE

Positive pressure systems are normally utilized for conveying product from a single entry point to one or more destinations. The positive system uses a minimum air quantity to move a given amount of product. Material can be transported over relatively long distances using the positive pressure system.

When required, step line conveying systems can be employed to provide relatively constant conveying velocities to minimize product degradation during the conveying cycle.

 

 

NEGATIVE PRESSURE - DILUTE PHASE

Negative pressure pneumatic systems are well suited for conveying material from a number of inlet points such as unloading rail cars, transporting and discharging product into a single point.

Pneumatic systems are used when a variety of feed configurations may be required, and are almost always used when handling toxic materials to avoid accidental discharge to the atmosphere.

When required, step line conveying systems can be employed to provide relatively constant conveying velocities to minimize product degradation during the conveying cycle.

 


Typical Systems

 

 

COMBINATION NEGATIVE/POSITIVE PRESSURE -DILUTE PHASE

The pull-push system incorporates the advantages and benefits of both negative and positive pressure arrangements in a single system. Systems are used where there are multiple material entry points, and multiple delivery points. Typical applications include drawing materials from several points for batching before entering process and unloading from several points such as rail cars with delivery to bulk storage.

When required, step line conveying systems can be employed to provide relatively constant conveying velocities to minimize product degradation during the conveying cycle.

 

CLOSED LOOP- DILUTE PHASE

Closed loop systems are used for handling hazardous chemicals, hygroscopic materials and extremely dusty products. Products such as TPA, caustic soda, and IPA require protection from atmosphere and particularly oxygen. These materials may be transported pneumatically in a closed loop system using an inert gas as the conveying medium.

Both negative and positive pressure conveying systems are adaptable to closed loop design.

This type of system is especially adaptable to edge trim conveying applications and for use in conjunction with rotary knife cutters, reduction mills and similar process machinery which require an air draw for proper operation.

 

 

 

 

 

CENTRIFUGAL BLOWER - DILUTE PHASE

Blower systems can be positive pressure, negative pressure, combination negative/positive pressure, or closed loop systems. They are similar to other pneumatic systems, except that centrifugal blowers replace the positive displacement power packages.

The design of this type system is limited in static pressure capability, and usually to relatively short distances. In the case of a thru-the-fan pull/push centrifugal blower system, the product must be adaptable to passing through the blower.

 

 

 

Centrifugal Blower System

Young's Heavy Duty Centrifugal Blower line offers thirty-two basic models with static pressure capabilities of up to 75" WG and volumes to 2,700 CFM are available. Blowers are constructed of stainless steel, carbon steel, including high strength abrasion resistant steels. These blowers can be designed for conveying systems with materials passing directly through the blower.

 

 

Free application engineering assistance

Young Industries engineers can work with you to design equipment or conveyors to solve your bulk materials handling problem. As simple as the process is, any additional knowledge, experience and planning we can provide will make your equipment more reliable and efficient. For free application assistance, contact us by telephone at 570-546-3165 or by email mktinfo@younginds.com

 

 

 

Request for more Information

 

 

Request for more Information

 

Powder Show 2014

 

 

SilentFlow Bin Discharger

Safety-FLow Grate Video

 

SilentFlow Bin Discharger

SilentFlow Bin Discharger

 

Direct-From-Bulk Bag Unloader

DFB Unloader with STINGER

 

Model SE (Side Entry) Rotary Valve

Model SE Rotary Valve