Young Industries, Inc.

16 Painter Street
Muncy, PA USA
17756-0030
Ph: 570-546-3165
800-546-3165
mktinfo@younginds.com

 

 

 

Are you looking to lower your diverter valve costs and improve your bulk materials handling reliability ?

 

You have found the answer.

 

We invite you to learn about Young Industries' Rugged and Reliable Diverter Valves. Since 1947, Young Industries products are known for their long history of innovation and proven reliability. Young has been providing equipment with the lowest overall cost of ownership as compared with equipment having low initial cost.

 

Starting with the standard features and follow by the application proven designs and models, Young Industries, Inc. provides the best value in Diverter Valves.

 

Young Industries' diverter valves have five major performance features

  1. Over 55 years of experience in applying diverter valves to bulk materials handling problems
  2. Design engineering expertise to reduce your total cost of ownership
  3. Longer service life by using high quality materials of construction
  4. Built using the most modern manufacturing processes
  5. Industries lowest air or gas leakage between diverter legs

 

 

Swing Gate Diverter Valve

Valves used in pneumatic conveying systems where a positive diversion seal is required.

Design configuration can be either an eccentric or true "Y" to route materials in either direction.

A square cross section is used at the swing gate area allowing precision machining of all mating surfaces. Teflon sealing strips on either side of the swing gate contact the machine surfaces providing smooth operation, low leak-age and long life.

 

Model "B" Swing Gate Diverter Valve

 

The Young Industries, Inc. Model "B" Swing Gate Diverter Valve are used in a wide variety of pneumatic conveyor applications. The valve can be used in either a positive or negative pneumatic conveyors

 

The Model "B" Diverter Valves are designed with one diversion leg offset 30° from the straight through leg.

 

 

Model "C" Swing Gate Diverter Valve

 

The Young Industries, Inc. Model "C" Swing Gate Diverter Valve are used in a wide variety of pneumatic conveyor applications. The valve can be used in either a positive or negative pneumatic conveyors

 

The Model "C" Diverter Valves are designed with each diversion leg offset 30° from the inlet leg.

 

 

 

Rotary Plug Diverter Valve

 

The Rotary Plug Diverter Valves are designed to prevent cross contamination of the bulk material by the seal materials as well as provide low leakage between the legs.

 

The Young Industries, Inc. Rotary Plug Diverter Valves are used in a wide variety of pneumatic conveyor applications. The valve can be used in either a positive or negative pneumatic conveyors and gravity flow applications.

 

The Rotary Plug Diverter Valves are designed with each diversion leg offset 30° from the straight through leg. The Rotary Plug Valve provide the lowest leakage is the industry.

 

 

 

 

Gravity Diverters

Rotary vane and blade diverter valves are used in gravity discharge convey lines to eliminate product and dust carry-over between discharge leg and idle leg of diverter valve.

 

 

Blade Diverters

 

The Blade Diverter Valves are designed for mounting on a gravity discharge line to divert from a single inlet to one straight through leg or one divert leg and were cross over dusting is minimized.

 

The Young Industries, Inc. Blade Diverter Valves are used in a wide variety of gravity flow bulk material applications were a minimum dusting between the legs is acceptable. The Blade Diverter Valves are designed with one diversion leg offset either 30° or 45° from the inlet leg.

 

 

Rotary Vane Diverter

 

The Young Industries, Inc. Rotary Vane Diverter Valves are used in a wide variety of gravity flow bulk material applications were a minimum dusting between the legs is acceptable. The Rotary Vane Diverter Valves are designed with the diversion legs offset either 30° or 45° from the inlet leg.

 

 

Bucket Diverter

Valves used in gravity drop convey lines where minor amounts of dust or cross contamination is tolerated.

 

Bucket Valve

 

The Young Industries, Inc. Bucket Diverter Valves are used in a wide variety of gravity flow bulk material applications were cross contamination is not a problem. The Bucket Diverter Valves are designed with one diversion leg offset either 30° or 45° from the inlet leg.

 

 

 

 

 

Diverter Valves

Sized from 2" thru 18" Materials of construction include:

 

 

 

 

 

 

 

 

 

 

 

Request for more Information

 

 

Request for moreInformation

 

 

 

SilentFlow Bin Discharger

Safety-FLow Grate Video

 

SilentFlow Bin Discharger

SilentFlow Bin Discharger

 

Direct-From-Bulk Bag Unloader

DFB Unloader with STINGER

 

Model SE (Side Entry) Rotary Valve

Model SE Rotary Valve