Model ST-1 STINGER® Gravimetric & Volumetric Feeder

Feeder 1 ST 300x278 Model ST 1 STINGER® Gravimetric & Volumetric Feeder

Young Industries Model ST-1 STINGER® Feeder

Model ST-1 STINGER® Gravimetric & Volumetric Feeder Application:

Fast batch weighing of fine difficult to handle materials without the use of any moving parts.

 

Model ST-1 STINGER® Feeder Design Features:

Compact, economical design combines feeder tube support frame and hopper into one weldment
Highest turn down rate (500:1) for reducing your process time.
Batch Accuracy up to +/- .1 Lbs.
Standard inlet to discharge lengths from 1′ to 10′, longer lengths are also available as options
Wide range of standard hopper sizes
Feed rates up to 30,000 lbs./hr. provide fast accurate batches
Feeder Tube features Young Industries STINGER® Technology
STINGER® Feed Hopper features a built in Young Industries SilentFlow® Discharger that conditions material without any moving parts or vibration
Available in NEMA 4 or Explosion Proof designs

Model ST-1 STINGER® Feeder Unique Design Qualities:

No Auger means no moving parts to wear out or replace
Low energy costs
No safety hazards common to screw augers
No vibration to disrupt scale
No bearings or motors to maintenance or replace
Minimal maintenance
Dependable service

 A Few of the Common Materials Handled:

Adipic Acid – Carbon Black – Fly Ash – Metal Powders – Powdered Sugar – Aluminum Oxide – Ceramic Powders  – Fumed Silica – Sodium Bicarbonate  – Pigments – Antomite – Corn Flour – Iron Oxide  – Powdered Minerals – Spices – Borax  – Clays – Lime – Polymers – Titanium Dioxide (all grades)- Calcium Carbonate  – Dextrose  –     Magnetite – Powdered Ceramics – Zinc Oxide

Model ST-1 STINGER® Feeder Feed Rates:

Note: Feed rates will vary based on feeder configuration and material properties.
Approximate capacities listed below

Feed Rate 1024x192 Model ST 1 STINGER® Gravimetric & Volumetric Feeder

Model ST-1 STINGER® Feeder Feed Hopper:

STINGER® Feed Hopper with built in SilentFlow® Discharger conditions material and discharges it into the feeder tube without the use of any moving parts or vibration
Features:

Standard hopper capacities range from .3 to 30 cu. ft. (8.5 to 850 liters)

  • Standard hopper sizes range from 12″ to 36″ square
  • Removable covers available in carbon steel or stainless steel

Model ST-1 STINGER® Feeder Support Frame:

  • Skirt supported for compact low head room design
  • Hanging mount frames are available as a special option

 

Model ST-1 STINGER® Feeder Scale Frame:

  • Precision platform type scale for stable accurate weighing
  • Available in carbon steel or stainless steel
  • Standard scale capacities range from 30 to 5,000 lbs. (13.6 kg. to 23.272 kg.)Note: Actual scale capacity needed is based on material bulk density and feeder configurat

 FeederLineDrawing 300x288 Model ST 1 STINGER® Gravimetric & Volumetric Feeder

Model STS-1 STINGER® Feeder Technical Data:

Model ST-1 STINGER® Feeder Materials of Construction:

Available options include:

Model ST-1 STINGER® Feeder Housing:

  • Option 1: Painted Carbon Steel Exterior with bare metal interior
  • Option 2: 304 WPC Stainless Steel
  • Option 3: 316 WPC Stainless Steel

Note: All interior TransFlow® lined surfaces constructed of 316 Stainless Steel

Model ST-1 STINGER® Feeder Standard. Hopper Cover:

Removable sizes 12″ to 36″ square
Standard Construction of High Density Polyethylene (HDPE)

Model ST-1 STINGER® Feeder Support Frame:

  • Option 1: Painted Carbon Steel
  • Option 2: 304 Stainless Steel

Model ST-1 STINGER® Feeder Feeder Tube:

  • Standard – 304 Stainless Steel Housing with 316 Stainless Steel  TransFlow® Fluidizing Media
  • Option 1: Carbon Steel Housing with 316 Stainless Steel  TransFlow® Fluidizing Media
  • Option 2 – 316 Stainless Steel Housing with 316 Stainless    Steel TransFlow® Fluidizing Media

Model ST-1 STINGER® Feeder Assembly Hardware

  •  Standard: Plated Carbon Steel
  • Optional : 8-18 Stainless Steel

Model ST-1 STINGER® Feeder Interior Pressure:

  • Operates at ambient pressure
  • Standard Design Pressure – 10″ W.C.
  • Custom Design Pressure up to 150 PSIG

Model ST-1 STINGER® Feeder Temperature Range:

Scales are temperature compensated from
14º F to 104º F   (10º C to 40º C)

Model ST-1 STINGER® Feeder Compressed Air/Gas Usage

Pressure: 10 to 30 psig
Volume:

AirUsage 300x186 Model ST 1 STINGER® Gravimetric & Volumetric Feeder

Usage dependent on feeder hopper, tube size and
materials handled

Model ST-1 STINGER® Feeder Controls:

The Young Industries Model ST-1 Feeder is suitable for use in loss-in-weight or gain-in-weight batch applications. The controls package determines the actual feeder package operation. Our family of Young Industries TOUCHSTONE™ controllers are designed to work seamlessly with each of our STINGER® Feeders. Customers may choose a suitable Batch, Continuous, control to meet your feeder and specific application needs.

Model ST-1 STINGER® Feeder Standard TOUCHSTONE™ features include:

  • Ships pre-configured for quick setup
  • NEMA 4 enclosure with optional upgrade to explosion proof enclosure
  • Features Quick Disconnect Electrical Fittings for quick and easy maintenance

Model ST-1 STINGER® Feeder Electrical area Classifications:

  • Standard NEMA 4
  • Optional NEMA 4X
  • Optional NEMA 7/9

Model ST-1 STINGER® Feeder Power Requirements:

TOUCHSTONE™ controls: Universal input voltage accepts
110 – 220Volts, 50/60hz single phase electrical
supply. Instrument power: Standard 24VDC

Model ST-1 STINGER® Feeder Drive: (Not Required)

Because the “ST-1” STINGER® Feeder uses STINGER® Technology and is capable of making fast, accurate, consistent weighments without any moving parts, there is no need for a drive system or a motor. This smart, economical design not only saves money through reduction in spare parts but also results in savings of reduced utility and maintenance costs.